References
-
Ali, M., Bathaei, M. J., Istif, E., Karimi, S. N. H. & Beker, L. Biodegradable piezoelectric polymers: recent advancements in materials and applications. Adv. Healthc. Mater. 12, e2300318 (2023).
-
Yadegari, A. et al. Recent advancements in bio-based dielectric and piezoelectric polymers and their biomedical applications. J. Mater. Chem. B 12, 5272–5298 (2024).
-
Nagarajan, K. J. et al. A comprehensive review on cellulose nanocrystals and cellulose nanofibers: Pretreatment, preparation, and characterization. Polym. Compos. 42, 1588–1630 (2021).
-
Ji, J. et al. Research Trends of Piezoelectric Nanomaterials in Biomedical Engineering. Adv. Nanobiomed Res. 3, (2023).
-
Tseng, H. J., Tian, W. C. & Wu, W. J. Flexible PZT thin film tactile sensor for biomedical monitoring. Sens. (Switz.) 13, 5478–5492 (2013).
-
Muralt, P. et al. Piezoelectric Micromachined Ultrasonic Transducers Based on PZT Thin Films. 2276 ieee transactions on ultrasonics, ferroelectrics, and frequency control vol. 52 (2005).
-
Cheng, J., Chen, Y., Wu, J. W., Ji, X. R. & Wu, S. H. 3d printing of BaTiO3 piezoelectric ceramics for a focused ultrasonic array. Sensors (Switzerland) 19, (2019).
-
Li, J. et al. A walking type piezoelectric actuator based on the parasitic motion of obliquely assembled PZT stacks. Smart Mater. Struct. 30, (2021).
-
Yuan, H. et al. Low sintering temperature, large strain and reduced strain hysteresis of BiFeO3–BaTiO3 ceramics for piezoelectric multilayer actuator applications. Ceram. Int. 47, 31349–31356 (2021).
-
Habib, M., Lantgios, I. & Hornbostel, K. A review of ceramic, polymer and composite piezoelectric materials. J. Phys. D. Appl. Phys. 55, 423002 (2022).
-
Abbasipour, M., Khajavi, R. & Akbarzadeh, A. H. A comprehensive review on piezoelectric polymeric and ceramic nanogenerators. Adv. Eng. Mater. 24, 2101312 (2022).
-
Zhang, M. et al. Flexible self-powered friction piezoelectric sensor based on structured PVDF-based composite nanofiber membranes. ACS Appl. Mater. Interfaces 15, 30849–30858 (2023).
-
Organic biodegradable piezoelectric materials and their potential applications as bioelectronics. Soft Science https://doi.org/10.20517/ss.2022.30 (2023)
-
Wang, R., Sui, J. & Wang, X. Natural piezoelectric biomaterials: a biocompatible and sustainable building block for biomedical devices. ACS Nano 16, 17708–17728 (2022).
-
Zhu, H., Wang, J., Yang, X., Zhang, B. & Wang, Z. Tailoring Biopolymers for Electronic Skins: Materials Design and Applications. Advanced Materials 2413112, https://doi.org/10.1002/ADMA.202413112;REQUESTEDJOURNAL:JOURNAL:15214095;WGROUP:STRING:PUBLICATION. (2024).
-
Ansari, M. M., Heo, Y., Do, K., Ghosh, M. & Son, Y. O. Nanocellulose derived from agricultural biowaste by-products–Sustainable synthesis, biocompatibility, biomedical applications, and future perspectives: A review. Carbohydr. Polym. Technol. Appl. 8, 100529 (2024).
-
Yadav, M. et al. Seafood waste: a source for preparation of commercially employable chitin/chitosan materials. Bioresour. Bioprocess. 2019 6:1 6, 1–20 (2019).
-
Li, J., Ma, Y., Zhang, T., Shung, K. K. & Zhu, B. Recent advancements in ultrasound transducer: from material strategies to biomedical applications. BME Front 2022, 9764501 (2022).
-
Xu, M. et al. Piezoelectric biopolymers: advancements in energy harvesting and biomedical applications. Polym. (Basel) 16, 3314 (2024).
-
Agarwal, A., Shaida, B., Rastogi, M. & Singh, N. B. Food packaging materials with special reference to biopolymers-properties and applications. Chem. Afr. 2022 6:1 6, 117–144 (2022).
-
de Marzo, G. et al. Sustainable, flexible, and biocompatible enhanced piezoelectric chitosan thin film for compliant piezosensors for human health. Adv. Electron. Mater. 9, (2023).
-
Fathollahzadeh, V. & Khodaei, M. Enhanced piezoelectric response of PVDF by incorporating of BaTiO3 nanoparticles and surface treatment. J. Mater. Sci.: Mater. Electron. 35, 1–16 (2024).
-
Bettotti, P. & Scarpa, M. Nanocellulose and Its Interface: On the Road to the Design of Emerging Materials. Adv. Mater. Interfaces 9, (2022).
-
Teodoro, K. B. R. et al. A review on the role and performance of cellulose nanomaterials in sensors. ACS Sens 6, 2473–2496 (2021).
-
Miao, C., Reid, L. & Hamad, W. Y. Moisture-tunable, ionic strength-controlled piezoelectric effect in cellulose nanocrystal films. Appl. Mater. Today 24, (2021).
-
Liu, S., Qamar, S. A., Qamar, M., Basharat, K. & Bilal, M. Engineered nanocellulose-based hydrogels for smart drug delivery applications. Int. J. Biol. Macromol. 181, 275–290 (2021).
-
Do, T. V. V., Tran, N. B. A. & Nguyen-Thai, N. U. Preparation of spherical nanocellulose from
Gai bamboo and mechanical properties of chitosan/nanocellulose composite. Polym. Compos. 44, 2287–2295 (2023). -
Lin, N. & Dufresne, A. Surface chemistry, morphological analysis and properties of cellulose nanocrystals with gradiented sulfation degrees. Nanoscale 6, 5384–5393 (2014).
-
Moon, R. J., Martini, A., Nairn, J., Simonsen, J. & Youngblood, J. Cellulose nanomaterials review: structure, properties and nanocomposites. Chem. Soc. Rev. 40, 3941–3994 (2011).
-
de Marzo, G. et al. On the measurement of piezoelectric d33 coefficient of soft thin films under weak mechanical loads: A rapid and affordable method. Mater. Des. 247, 113399 (2024).
-
Di Giorgio, L., Martín, L., Salgado, P. R. & Mauri, A. N. Synthesis and conservation of cellulose nanocrystals. Carbohydr. Polym. 238, 116187 (2020).
-
Shakouri, Z., Nazockdast, H. & Sadeghi Ghari, H. Effect of the geometry of cellulose nanocrystals on morphology and mechanical performance of dynamically vulcanized PLA/PU blend. Cellulose 27, 215–231 (2020).
-
Al-haql, M., Habbal, H., Al Oklah, B. & Qurabi, N. Extraction and characterization of spherical nanocellulose from sesame husks. Heliyon 11, e41269 (2025).
-
Ahmad, N. D., Kusmono & Wildan, M. W. Preparation and properties of cellulose nanocrystals-reinforced Poly (lactic acid) composite filaments for 3D printing applications. Results Eng. 17, 100842 (2023).
-
Kusmono Wildan, M. W. & Lubis, F. I. Fabrication and Characterization of Chitosan/Cellulose Nanocrystal/Glycerol Bio-Composite Films. Polymers 2021, Vol. 13, Page 1096 13, 1096 (2021).
-
Wojno, S., Fazilati, M., Nypelö, T., Westman, G. & Kádár, R. Phase transitions of cellulose nanocrystal suspensions from nonlinear oscillatory shear. Cellulose 29, 3655–3673 (2022).
-
Gray, D. G. et al. Chiral nematic structure of cellulose nanocrystal suspensions and films; polarized light and atomic force microscopy. Mater 8, 7873–7888 (2015).
-
Chen, J. et al. All bio-based chiral nematic cellulose nanocrystals films under supramolecular tuning by chitosan/deacetylated chitin nanofibers for reversible multi-response and sensor application. Chem. Eng. J. 466, 143148 (2023).
-
Korolovych, V. F. et al. Cellulose nanocrystals with different morphologies and chiral properties. Polym. (Guildf.) 145, 334–347 (2018).
-
Miao, C. & Hamad, W. Y. Critical insights into the reinforcement potential of cellulose nanocrystals in polymer nanocomposites. Curr. Opin. Solid State Mater. Sci. 23, 100761 (2019).
-
Li, H. Z., Chen, S. C. & Wang, Y. Z. Preparation and characterization of nanocomposites of polyvinyl alcohol/cellulose nanowhiskers/chitosan. Compos. Sci. Technol. 115, 60–65 (2015).
-
Aranaz, I. et al. Chitosan: an overview of its properties and applications. Polym. 2021, Vol. 13, Page 3256 13, 3256 (2021).
-
Xu, L. et al. Fully biodegradable piezoelectric nanogenerator based on cellulose/PLLA electrospun fibers with high-performance for mechanical energy harvesting. Colloids Surf. A Physicochem. Eng. Asp. 706, (2025).
-
Xiao, X. et al. Tunable Construction of Chiral Nematic Cellulose Nanocrystals/ZnO Films for Ultra-Sensitive, Recyclable Sensing of Humidity and Ethanol. Int. J. Mol. Sci. 2024, Vol. 25, Page 4978 25, 4978 (2024).
-
Khan, A. et al. Mechanical and barrier properties of nanocrystalline cellulose reinforced chitosan based nanocomposite films. Carbohydr. Polym. 90, 1601–1608 (2012).
-
Luo, Y. et al. Chitosan particles modulate the properties of cellulose nanocrystals through interparticle interactions: Effect of concentration. Int. J. Biol. Macromol. 240, 124500 (2023).
-
Riva, G. H. et al. Cellulose – chitosan nanocomposites – evaluation of physical, mechanical and biological properties. Cellul. – Fundamental Asp. Curr. Trends https://doi.org/10.5772/61727 (2015).
-
Zheng, X., Yang, H., Xia, W. & Zhang, Y. Size-dependent mechanical behaviors of cellulose nanocrystals induced by interfacial zone: implications for advanced electronic devices design. ACS Appl. Nano Mater. 8, 3974–3984 (2025).
-
Zheng, X., Li, Y., Xu, S., Yang, H. & Zhang, Y. Interfacial mechanical behavior of cellulose nanocrystals and chitosan. Macromolecules 58, 803–815 (2024).
-
Marin, L. & Bardosova, M. Functional Chitosan-Based Composites. Functional Chitosan-Based Composites 200 https://doi.org/10.3390/BOOKS978-3-0365-4649-0. (2022).
-
Ghasemlou, M., Daver, F., Ivanova, E. P., Murdoch, B. J. & Adhikari, B. Use of synergistic interactions to fabricate transparent and mechanically robust nanohybrids based on starch, non-isocyanate polyurethanes, and cellulose nanocrystals. ACS Appl. Mater. Interfaces 12, 47865–47878 (2020).
-
Yadav, M., Behera, K., Chang, Y. H. & Chiu, F. C. Cellulose nanocrystal reinforced chitosan based UV barrier composite films for sustainable packaging. Polym. 2020, Vol. 12, Page 202 12, 202 (2020).
-
Reay, S. L., Jackson, E. L., Ferreira, A. M., Hilkens, C. M. U. & Novakovic, K. In vitro evaluation of the biodegradability of chitosan–genipin hydrogels. Mater. Adv. 3, 7946–7959 (2022).
-
Hashemi Doulabi, A., Mirzadeh, H., Imani, M. & Bagheri-Khoulenjani, S. Chitosan/polyethylene glycol fumarate blend films for wound dressing application: in vitro biocompatibility and biodegradability assays. Prog. Biomater. 7, 143–150 (2018).
-
Frick, J. M., Ambrosi, A., Pollo, L. D. & Tessaro, I. C. Influence of glutaraldehyde crosslinking and alkaline post-treatment on the properties of chitosan-based films. J. Polym. Environ. 26, 2748–2757 (2018).
-
Islam, N., Wang, H., Maqbool, F. & Ferro, V. In vitro enzymatic digestibility of glutaraldehyde-crosslinked chitosan nanoparticles in lysozyme solution and their applicability in pulmonary drug delivery. Molecules 24, 1271 (2019).
-
Altun, E., Çelik, E. & Ersan, H. Y. Tailoring the microbial community for improving the biodegradation of chitosan films in composting environment. J. Polym. Environ. 28, 1548–1559 (2020).
-
Lončarević, A., Ivanković, M. & Rogina, A. Lysozyme-induced degradation of chitosan: the characterisation of degraded chitosan scaffolds. J. Tissue Repair Regeneration 1, 12–22 (2017).
-
Guarino, V. et al. Degradation properties and metabolic activity of alginate and chitosan polyelectrolytes for drug delivery and tissue engineering applications. AIMS Mater. Sci. 2, 497–502 (2015).
-
Roman, D. L., Ostafe, V. & Isvoran, A. Deeper inside the specificity of lysozyme when degrading chitosan. A structural bioinformatics study. J. Mol. Graph. Model. 100, 107676 (2020).
-
Ramírez-Hernández, A. et al. Fingerprint analysis of FTIR spectra of polymers containing vinyl acetate. Dyna (Medellin) 86, 198–205 (2019).
-
Makrani, N., Ammari, A., Benrekaa, N., Rodrigue, D. & Giroux, Y. Dynamics of the α-relaxation during the crystallization of PLLA and the effect of thermal annealing under humid atmosphere. Polym. Degrad. Stab. 164, 90–101 (2019).
-
Ren, K., Shen, Y. & Wang, Z. L. Piezoelectric Properties of Electrospun Polymer Nanofibers and Related Energy Harvesting Applications. Macromol. Mater. Eng. 309, https://doi.org/10.1002/mame.202300307 (2024).
-
Zhao, G. et al. Electrospun Poly(l‐Lactic Acid) Nanofibers for Nanogenerator and Diagnostic Sensor Applications. Macromol. Mater. Eng. 302, https://doi.org/10.1002/mame.201600476 (2017).
-
Shojaeiarani, J., Bajwa, D. S., Stark, N. M. & Bajwa, S. G. Rheological properties of cellulose nanocrystals engineered polylactic acid nanocomposites. Compos. B Eng. 161, 483–489 (2019).
-
Lu, T. et al. Effects of modifications of bamboo cellulose fibers on the improved mechanical properties of cellulose reinforced poly(lactic acid) composites. Compos. B Eng. 62, 191–197 (2014).
-
Yamaguchi, H. et al. Highly flexible and conductive glycerol-doped PEDOT:PSS films prepared under an electric field. J. Electron. Mater. 47, 3370–3375 (2018).
-
Zhou, S. et al. Chitosan-Doped PVDF film with enhanced electroactive β phase for piezoelectric sensing. ACS Appl. Electron. Mater. 6, 2575–2583 (2024).
-
Sun, S. et al. Thermoplastic PHB-reinforced chitosan piezoelectric films for biodegradable pressure sensors. ACS Appl. Bio Mater. 7, 6823–6831 (2024).
-
Prokhorov, E. et al. Chitosan-BaTiO3 nanostructured piezopolymer for tissue engineering. Colloids Surf. B Biointerfaces 196, 111296 (2020).
-
Prokhorov, E., Luna-Bárcenas, G., Limón, J. M. Y., Sánchez, A. G. & Kovalenko, Y. Chitosan-ZnO nanocomposites assessed by dielectric, mechanical, and piezoelectric properties. Polym. 2020, Vol. 12, Page 1991 12, 1991 (2020).
