- Article
- Open access
- Published:
Scientific Reports , Article number: (2026) Cite this article
We are providing an unedited version of this manuscript to give early access to its findings. Before final publication, the manuscript will undergo further editing. Please note there may be errors present which affect the content, and all legal disclaimers apply.
Subjects
Abstract
Embolic particles settle out of suspension inside syringes over time, leading to nonuniform particle delivery. A stepper motor stator was placed around a syringe containing a magnetic agitator to provide easily programmable rotating magnetic fields that result in the stirring of suspensions within the syringe. Injection uniformity was evaluated using a microscope, which recorded particle flow resulting from injections with and without mixing. Increasing delay times between initial uniform suspension and injection allowed particles to settle, which caused up to sixfold reductions in injection uniformity across all injection rates (1, 5, 10 mL/min), with particle boluses often ejected near the end of an injection. In-syringe mixing provided a fourfold improvement in injection uniformity at all injection flow rates following long delay times (120 s); at slow injection rates (1 mL/min), mixing provided better uniformity than all injections performed without mixing. Mixing performance was optimized by using moderate agitator rotation rates (~ 10 revolutions per second) and frequent changes in rotation direction (~ every 250 ms). This compact solution for maintaining and injecting uniform embolic suspensions prevents particle settling, reduces variability during injections, and has applications in both clinical and research settings.
Data availability
The data that support the findings of this current study are available from the corresponding author upon reasonable request.
References
-
Hu, J. et al. Advances in biomaterials and technologies for vascular embolization. Adv. Mater. 31, 1901071 (2019).
-
Wang, C. Y., Hu, J., Sheth, R. A. & Oklu, R. Emerging embolic agents in endovascular embolization: an overview. Prog Biomed. Eng. 2, 012003 (2020).
-
Lewis, A. L. et al. Comparative in vitro evaluation of Microspherical embolisation agents. J. Mater. Sci: Mater. Med. 17, 1193–1204 (2006).
-
Guiu, B. et al. An in vitro evaluation of four types of Drug-Eluting embolics loaded with Idarubicin. J. Vasc. Interv. Radiol. 30, 1303–1309 (2019).
-
Duran, R. et al. A novel inherently radiopaque bead for transarterial embolization to treat liver Cancer – A Pre-clinical study. Theranostics 6, 28–39 (2016).
-
Lewis, A. L. et al. Handling and performance characteristics of a new small caliber radiopaque embolic microsphere. J. Biomed. Mater. Res. B Appl. Biomater. 108, 2878–2888 (2020).
-
Levy, E. B. et al. First human experience with directly Image-able iodinated embolization microbeads. Cardiovasc. Intervent Radiol. 39, 1177–1186 (2016).
-
Lee, S. et al. Embolic agents: particles. Semin Intervent Radiol. 40, 315–322 (2023).
-
Horstkotte, B. & Solich, P. The automation technique Lab-In-Syringe: A practical guide. Molecules 25, 1612 (2020).
-
Syringe Pump, S. & Pump Max. Flow Rate 22 mL/min. (2025). https://www.auroraprosci.com/Syringe-Pump-Stirring-Pump-Max.-Flow-Rate-22mL-min
-
Sánchez, R. et al. Fully automatic In-Syringe magnetic Stirring-Assisted dispersive Liquid–Liquid Microextraction hyphenated to High-Temperature torch integrated sample introduction System-Inductively coupled plasma spectrometer with direct injection of the organic phase. Anal. Chem. 89, 3787–3794 (2017).
-
Urich, K. inventor; schering AG, assignee. Syringes and injectors incorporating magnetic fluid agitation devices. United States Patent US6706020B1, 1–13 (2004).
-
Witting, A. & Faigel, D. O. inventor; Mayo Foundation For Medical Education and Research, assignee. Self-stirring syringe devices and systems. World Intellectual Property Organization patent WO2017213783A1 (2017).
-
Ghoreishi, M. et al. A compact electromagnetic syringe stirrer and temperature controller for the reliable dispensing of living cells and microparticles. HardwareX 22, e00638 (2025).
-
Bremauer, B. inventor; Ben Bremauer, assignee. Syringe including magnetic stirrer. World Intellect. Property Organ. Patent WO2024243613A1, 1–17 (2024).
-
Syringe pump and mixer Nemix 50. (2025). https://cetoni.com/nemix-50/
-
ULTRAVIST (Iopromide Injection. ) Product Monograph. (2020). https://www.bayer.com/sites/default/files/2020-11/ultravist-pm-en.pdf
-
Imai, K. et al. Relationship between Dilution magnification of Non-Ionic iodinated contrast medium and amplification effect of radiation dose. Journal Neuroendovascular Therapy 16, 586–592 (2022).
-
Ghoreishi, M. et al. Modelling, simulation, and experimental characterization of particle sedimentation inside a horizontal syringe. Microfluid Nanofluid. 29, 28 (2025).
-
Caine, M. et al. Impact of Yttrium-90 microsphere Density, flow Dynamics, and administration technique on Spatial distribution: analysis using an in vitro model. J. Vasc. Interv. Radiol. 28, 260–268e2 (2017).
-
Speed – Torque Curves for Stepper Motors. https://www.orientalmotor.com/stepper-motors/technology/speed-torque-curves-for-stepper-motors.html
-
Athani, V. V. Stepper Motors : Fundamentals, Applications and Design (New Age International, 1997).
-
Konijn, B. J., Sanderink, O. B. J. & Kruyt, N. P. Experimental study of the viscosity of suspensions: effect of solid fraction, particle size and suspending liquid. Powder Technol. 266, 61–69 (2014).
-
Schieferstein, J. M., Reichert, P., Narasimhan, C. N., Yang, X. & Doyle, P. S. Hydrogel microsphere encapsulation enhances the flow properties of monoclonal antibody crystal formulations. Adv. Ther. 4, 2000216 (2021).
-
Baas, J. H. et al. Blood, lead and spheres: A hindered settling equation for sedimentologists based on metadata analysis. Depositional Record. 8, 603–615 (2022).
Funding
This work was supported in part by the Natural Sciences and Engineering Research Council of Canada Discovery Grant under Grant RGPIN-2020-06856.
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/.
About this article
Cite this article
Ng, D.KH., Drangova, M. & Holdsworth, D.W. Practical in-syringe mixing method for uniform particle delivery during embolization procedures. Sci Rep (2026). https://doi.org/10.1038/s41598-026-38823-x
-
Received:
-
Accepted:
-
Published:
-
DOI: https://doi.org/10.1038/s41598-026-38823-x
Keywords
Supplementary Material 1Supplementary Material 2Supplementary Material 3
